About Product Description Supplier Chang Chun Generic polybutylene terephthalate Material Status Commercial: Active Features Good surface appearance,High liquidity,HB Technical Data MECHANICAL Nominal value Unit Test method tensile strength 49-58.8 MPa ASTM D638 Tensile strain fracture 30 % ASTM D638 bending…
About Vydyne 50BWFS is general-purpose PA66 resin. Offered in natural and designed for extrusion-compounding applications, this product is available at two moisture levels: 0.2% (max) as Vydyne 50BW and 0.5% (max) as Vydyne 50BWFS. Vydyne 50BWFS provides the chemical resistance…
About Product Description Supplier Chang Chun Generic PA6 Material Status Commercial: Negative Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the…
About Product Description Generic PP not specified Material Status Commercial: Active Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 0.9 g/cm³ ISO 1183 Melt index 230℃，2.16kg 26 g/10min ISO 1133 MECHANICAL Nominal value Unit Test…
About Moplen EP548S Moplen EP548S is a nucleated heterophasic copolymer with antistatic agent used injection moulding applications. It combines a good impact/stiffness balance with a high fluidity. Moplen EP548S is typically used by customers in opaque containers, housewares, toys…
About Injection Molding CHARACTERISTICS: High fluidity, good impact strength, high stiffness, low warpage&& Product Description Generic PP homopolymerization Material Status Commercial: Active Features Impact copolymer,HB Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test…
About Product Description Generic PC+ABS Material Status Commercial: Negative Features Flame Characteristics Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 23℃ 1.18 g/cm³ ASTM D792 Moulding shrinkage Material flow direction 0.4-0.7 % ASTM D955 Melt…
About Product Description Generic PC+ABS Material Status Commercial: Negative Features HB Availabilitys Europe,Asia Pacific,North America Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.12 g/cm³ ASTM D792 Melt Flow Rate 240℃，5.0kg 8.6 g/10min ASTM D1238…
About Product Description Generic PC+ABS Material Status Commercial: Negative Features HB Availabilitys Europe,Asia Pacific,North America Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.12 g/cm³ ASTM D792 Melt Flow Rate 240℃，5.0kg 8.6 g/10min ASTM D1238…
About Product Description Generic PC+ABS Material Status Commercial: Negative Features HB Availabilitys Europe,Asia Pacific,North America Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.12 g/cm³ ASTM D792 Density 1.12 g/cm³ ISO 1183 Melt Flow Rate…