About Durethan®   AKV 50 H2.0 901510 (干燥 ) PA 66, 50 % glass fibers, injection molding, heat-aging stabilized&&Durethan®   AKV 50 H2.0 901510 PA 66, 50 % glass fibers, injection molding, heat-aging stabilized&& Product Description Supplier LANXESS Generic PA66…

About Product Description Supplier LANXESS Generic PA66 Material Status Commercial: Active Availabilitys Asia Pacific,Europe Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer…

About Product Description Supplier LANXESS Generic PA66 Material Status Commercial: Negative Features Heat Stabilized Availabilitys Africa & Middle East ,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density — 1.23 g/cm³ 23℃ 1.24 g/cm³ Apparent…

About Durethan®   AKV15H2.0 901510 (Dry) PA 66, 15 % glass fibers, injection molding, heat-aging stabilized&&Durethan®   AKV15H2.0 901510 PA 66, 15 % glass fibers, injection molding, heat-aging stabilized&&Durethan®   AKV15H2.0 901510 PA 66, 15 % glass fibers, injection molding,…

About Product Description Supplier LANXESS Generic PA6 Material Status Commercial: Negative Features Heat Stabilized,Good liquidity Availabilitys Asia Pacific Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Shrinkage rate TD：120℃，2.0 mm 0.020 % TD：280℃，2.0 mm 0.60 %…

About Durethan®   BC 30 S 000000 (干燥 ) PA 6, non-reinforced, injection molding&&Durethan®   BC 30 S 000000 PA 6, non-reinforced, injection molding&& Product Description Supplier LANXESS Generic PA6 Material Status Commercial: Active Availabilitys Africa & Middle East ,North…

About Durethan®   BKV50 000000 (Dry) PA 6, 50 % glass fibers, injection molding&&Durethan®   BKV50 000000 PA 6, 50 % glass fibers, injection molding&&Durethan®   BKV50 000000 PA 6, 50 % glass fibers, injection molding&& Product Description Supplier LANXESS…

About Durethan®   BKV50H2.0 901510 (Dry) PA 6, 50 % glass fibers, injection molding, heat-aging stabilized&&Durethan®   BKV50H2.0 901510 PA 6, 50 % glass fibers, injection molding, heat-aging stabilized&&Durethan®   BKV50H2.0 901510 PA 6, 50 % glass fibers, injection molding,…

About Durethan®   BKV35H2.0 901510 (Dry) PA 6, 35 % glass fibers, injection molding, heat-aging stabilized&&Durethan®   BKV35H2.0 901510 PA 6, 35 % glass fibers, injection molding, heat-aging stabilized&&Durethan®   BKV35H2.0 901510 PA 6, 35 % glass fibers, injection molding,…

About Durethan®   BKV130 000000 (Dry) PA 6-Copolymer, 30 % glass fibers, injection molding, improved impact strength&&Durethan®   BKV130 000000 PA 6-Copolymer, 30 % glass fibers, injection molding, improved impact strength&&Durethan®   BKV130 000000 PA 6-Copolymer, 30 % glass fibers,…