About Product Description Supplier Fushun Generic Linear low density polyethylene Material Status Commercial: Negative Technical Data PHYSICAL Nominal value Unit Test method Density 0.920±0.003 g/cm³ Melt index 2.0±0.5 g/10min MECHANICAL Nominal value Unit Test method Tensile stress yield ≥10 MPa…
About Product Description Supplier Covestro Generic Polycarbonate Material Status Commercial: Active Availabilitys Latin America,North America,Europe,Africa & Middle East ,Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.20 g/cm³ ISO 1183 Apparent density 0.66 g/cm³ ISO 60 Melt…
About TECHNYL® A 218 V30 Black 34 NG is a polyamide 66, reinforced with 30% of glass fiber, heat stabilized, for injection moulding. This grade has been specially designed to improve its resistance to automotive cooling liquids, increasing lifetime of…
About Product Description Generic PP not specified Material Status Commercial: Negative Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Melt index 2 g/10min GBT 3682 MECHANICAL Nominal value Unit Test method tensile strength ≥24 MPa GB/T…
About Product Description Generic PP not specified Material Status Commercial: Negative Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…
About Product Description Generic PS (HIPS) Material Status Commercial: Active Technical Data MECHANICAL Nominal value Unit Test method tensile strength 23 MPa ASTM D-638 bending strength 46 MPa ASTM D-790 elongation 47 % ASTM D-638 Notch impact strength 110 J/m…
About Product Description Supplier PETROCHEMICAL Generic HDPE Material Status Commercial: Active Technical Data MECHANICAL Nominal value Unit Test method Shore hardness 64 ISO 868 ESCR(FNCT) 2.5MPa 1.5 hrs IEC CD 16770 Tensile strain fracture ＞1000 % ISO 527 tensile strength…
About Product Description Generic PS (GPPS) Material Status Commercial: Active Technical Data MECHANICAL Nominal value Unit Test method tensile strength 42 MPa ASTM D-638 bending strength 80 MPa ASTM D-790 Bending modulus 3200 MPa ASTM D-790 PHYSICAL Nominal value Unit…
About Tenac™-C Z4520 is an Acetal (POM) Copolymer product. It is available in Africa & Middle East, Asia Pacific, Europe, or North America. Applications of Tenac™-C Z4520 include automotive, engineering/industrial parts and housings. Characteristics include: Copolymer Medium Viscosity&& Product Description…
About Tenac™-C 4513 is an Acetal (POM) Copolymer product. It is available in Africa & Middle East, Asia Pacific, Europe, or North America. Applications of Tenac™-C 4513 include engineering/industrial parts, automotive and housings. Characteristics include: Copolymer Medium Viscosity UV Resistant…