About Product Description Supplier Sumitomo Material Status Commercial: Negative Features Good liquidity,HB Availabilitys North America,Europe,Asia Pacific Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.19 g/cm³ JIS K7112 Melt Flow Rate 230℃，3.80kg 15 g/10min JIS…
About Product Description Generic Polycarbonate Material Status Commercial: Active Availabilitys China Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…
About Product Description Supplier Evonik Generic PA Not specified Material Status Commercial: Active Availabilitys Europe Technical Data MECHANICAL Nominal value Unit Test method Tensile modulus 1480 / 1490 MPa ISO 527 tensile strength 59 / 63 MPa ISO 527 Yield…
About Product Description Supplier Evonik Generic PA Not specified Material Status Commercial: Active Technical Data MECHANICAL Nominal value Unit Test method Tensile modulus 1400 MPa ISO 527 tensile strength 60 MPa ISO 527 Yield stress 60 MPa ISO 527 Yield…
About By selecting specific monomers, one can achieve a crystallizable and permanently transparent polyamide: TROGAMID® CX. The crystallites are so small that they do not scatter visible light, and the material appears transparent to the human eye—a property known as…
About By selecting specific monomers, one can achieve a crystallizable and permanently transparent polyamide: TROGAMID® CX. The crystallites are so small that they do not scatter visible light, and the material appears transparent to the human eye—a property known as…
About MVR (300 °C kg) 9.0 cm³/10 min; flame retardant; UL 94V-0 mm and 5VA mm; medium viscosity; easy release; injection molding – melt temperature 280 – 320 °C; available in opaque colors only&& Product Description Supplier Covestro Generic Polycarbonate…
About Hopelex PC-1100U is a medium viscosity, clear polycarbonate, which is suitable for outdoor injection applications. Hopelex PC-1100U have UV stabilized ingredients to prevent degradation of final PC products from lights.&& Product Description Supplier LOTTE Generic Polycarbonate Material Status Commercial:…
About PC-1070U has higher viscosity, impact strength, tensile & flexural strength, and elastic modulus, which can be used in sheet-extrusion and stringent demand such as and goggles etc. Hopelex PC-1070U have UV stabilized ingredients to prevent degradation of final PC…
About LUPOY PC 1301V-10 resin is designed for extrusion and injection molding products. It exhibits an excellent physical property balance of heat resistance, transparency and impact strength.&& Product Description Supplier LG Chemical Generic Polycarbonate Material Status Commercial: Active Features Good…