About Rilsan® BESN BLACK P40 TL resin is a polyamide produced from a renewable source. This grade is plasticized and designed for extrusion.&& Product Description Supplier Arkema Generic PA 11 Material Status Commercial: Active Features Weather resistance is good,Renewable resources,Lubricating,Plasticizing,Heat…
About Product Description Generic PC+ABS Material Status Commercial: Negative Process Methods Injection Molding Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of…
About General Diffusion CHARACTERISTICS: General diffusion, High flow ability, UV stabilization, V2 rated.&& Product Description Generic Polycarbonate Material Status Commercial: Active Features Weather resistance is good,High liquidity Availabilitys North America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density…
About Product Description Supplier Nan Ya Generic PA66 Material Status Commercial: Negative Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.38 g/cm³ ASTM D792 Water absorption rate 23°C，24hrs 0.7 % ASTM D570 Melt index 20 g/10min…
About Rilsamid® AZM 30 BLACK T6LD resin is a fiberglass reinforced polyamide. This black colored grade is designed for injection molding.&& Product Description Supplier Arkema Generic PA12 Material Status Commercial: Active Features HB Availabilitys Africa & Middle East ,North America,Latin…
About Product Description Supplier Nan Ya Generic PA66 Material Status Commercial: Active Features Low Viscosity,Food contact compliance Availabilitys Asia Pacific Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data…
About Product Description Supplier Nan Ya Material Status Commercial: Active Technical Data MECHANICAL Nominal value Unit Test method tensile strength yield 1450 kg/cm² ASTM D638 Tensile strain 2.2 % ASTM D638 bending strength 2000 kg/cm² ASTM D790 Bending modulus 90000…
About Rilsamid® AESNO TL resin is a rigid polyamide with high viscosity. This natural grade is designed for tube extrusion.&& Product Description Supplier Arkema Generic PA12 Material Status Commercial: Active Features HB Availabilitys Africa & Middle East ,North America,Latin America,Asia…
About FR-NYLON 66, like other NYLONs, has the characteristic of easy water absorption; However, NYLON 66 has a lower water absorption rate than NYLON 6, but it still belongs to the category of high water absorption materials in engineering plastics.…
About Rilsamid® AZM 30 O TLD resin is a fiberglass reinforced polyamide. This natural grade is designed for injection moulding. This grade is also available in green (Rilsamid® AZM 30 Green 56827 TLD resin) and grey (Rilsamid® AZM 30 Grey…