About LEXAN 925 Polycarbonate (PC) resin is a non-filled, injection moldable grade. This non-chlorinated, non-brominated flame retardant PC has a UL V0 rating and is available in various opaque color options. LEXAN 925 resin is a general-purpose resin that is…
About PC/ABS, hydrolytically stable, natural only.&& Product Description Supplier SABIC Generic PC+ABS Material Status Commercial: Active Features Good heat aging resistance,High impact resistance,Hydrolysis stability,Good liquidity,High Heat Resistance Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value…
About Product Description Supplier ZYPEEK Material Status Commercial: Active Availabilitys China Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…
About Product Description Supplier ZYPEEK Generic PEEK Material Status Commercial: Active Technical Data MECHANICAL Nominal value Unit Test method Shore hardness 23℃ 83 D 级 ISO 868 compressive strength 23℃ 170 MPa ISO 604 Tensile strain Fracture, 23 ℃ 2…
About Product Description Supplier ZYPEEK Generic PEEK Material Status Commercial: Active Technical Data MECHANICAL Nominal value Unit Test method Shore hardness 23℃ 83 D 级 ISO 868 compressive strength 23℃ 170 MPa ISO 604 Tensile strain Fracture, 23 ℃ 2.2…
About Product Description Supplier ZYPEEK Generic PEEK Material Status Commercial: Active Technical Data MECHANICAL Nominal value Unit Test method Shore hardness 23℃ 86 D 级 ISO 868 compressive strength 23℃ – MPa ISO 604 Tensile strain Fracture, 23 ℃ 1.9…
About Product Description Supplier ZYPEEK Generic PEEK Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density crystallization 1.37 g/cm³ ISO 1183 Water absorption rate 23℃，24hr，3.20 mm 0.05 % ISO 62-1 Equilibrium, 23 ℃, 3.20 mm 0.4…
About Product Description Supplier ZYPEEK Generic PEEK Material Status Commercial: Active Technical Data MECHANICAL Nominal value Unit Test method Shore hardness 23℃ 86 D 级 ISO 868 compressive strength 23℃ – MPa ISO 604 Tensile strain Fracture, 23 ℃ 2.1…
About Product Description Supplier ZYPEEK Generic PEEK Material Status Commercial: Active Technical Data MECHANICAL Nominal value Unit Test method Shore hardness 23℃ 88 D 级 ISO 868 compressive strength 23℃ 300 MPa ISO 604 Tensile strain Fracture, 23 ℃ 1.5…
About Product Description Supplier ZYPEEK Generic PEEK Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density crystallization 1.4 g/cm³ ISO 1183 Water absorption rate 0.04 % ISO 62-1 0.3 % ISO 62-1 Shrinkage rate MD 0.5…