About Outline: FZ-2140 is a 40% glass fiber reinforced linear polyphenylene sulfide compound that is well balanced with excellent engineering properties and processability. Color: Black&& Product Description Supplier DIC Corporation Generic PPS Material Status Commercial: Active Features Excellent Processability,V-0 Availabilitys…
About Light guiding, High strength&& Product Description Supplier Idemitsu Generic Polycarbonate Material Status Commercial: Active Features Good Rigidity Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density…
About Product Description Supplier Lubrizol Advanced Materials Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method hardness 78 Shore D ASTM D2240 proportion 1.28 g/cm³ ASTM D792 Mold shrinkage rate 0.003 m/m ASTM D955 MECHANICAL Nominal value…
About 中国石化高密度聚乙烯中空料密度较大，模量高，刚性、韧 性好，耐环境应力开裂性能良好，加工性能优异，适用于中 空吹塑中型或大型装运液体的容器。 Product Description Supplier Maoming Generic HDPE Material Status Commercial: Active Features Excellent Processability,High density,Rigid-tough balance,High ESCR,High modulus Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 0.3 g/10min Density 0.955 g/cm³…
About Product Description Supplier Maoming Generic LDPE Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 0.919 g/cm³ Melt Flow Rate 2.17 g/10min MECHANICAL Nominal value Unit Test method tensile strength ≥17-10 MPa tensile strength yield…
About Product Description Supplier Maoming Generic LDPE Material Status Commercial: Active Features Good Dimensional Stability,High liquidity Technical Data PHYSICAL Nominal value Unit Test method Density 23℃ 0.92 g/cm³ Melt Flow Rate Standardization 45-50 g/10min deviation 49.3 g/10min MECHANICAL Nominal value…
About Product Description Supplier Victrex Material Status Commercial: Active Features Good disinfection,Good liquidity,Low CLTE,Hypocrystalline,Solvent resistance,Food contact compliance,Good Rigidity Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density…
About Product Description Supplier Maoming Generic LDPE Material Status Commercial: Active Features Good Clarity Technical Data PHYSICAL Nominal value Unit Test method Density 0.923 g/cm³ ISO 1183 Melt Flow Rate 190℃，2.16kg 4 g/10min ISO 1133 MECHANICAL Nominal value Unit Test…
About High performance thermoplastic material, 15% glass fibre reinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding, very easy flow, FDA food contact compliant, colour natural Complex geometries with thin cross sections or long flow lengths where good strength in…
About Product Description Supplier Maoming Generic LDPE Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 0.923 g/cm³ ISO 1183 Melt Flow Rate 1.9 g/10min ISO 1133 MECHANICAL Nominal value Unit Test method tensile strength TD…