About Ferro PP LPP20BN19HB-AL is a Polypropylene product filled with 20% calcium carbonate. It can be processed by injection molding and is available in Latin America or North America. Applications of Ferro PP LPP20BN19HB-AL include coating applications, handles and household…
About Product Description Supplier Teknor Apex Generic TPE Material Status Commercial: Active Features Weather resistance is good,Good wear resistance,Solvent resistance Availabilitys Asia Pacific Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 0.95 g/cm³ ASTM D792…
About Dynacom 514-G30 is an Acrylonitrile Butadiene Styrene (ABS) material. It is available in Asia Pacific. Primary attribute of Dynacom 514-G30: Flame Rated.&& Product Description Supplier Dynachem Generic ABS Material Status Commercial: Active Features V-0 Availabilitys Asia Pacific Technical Data…
About Solarene® S344 is a General Purpose Polystyrene product. It is available in Asia Pacific or Europe. Primary characteristic: flame rated.&& Product Description Generic PS (GPPS) Material Status Commercial: Active Features HB Availabilitys Asia Pacific,Europe Technical Data PHYSICAL Nominal value…
About Deltron 5365 is a Polyphenylene Sulfide (PPS) material. It is available in Asia Pacific for injection molding. Important attributes of Deltron 5365 are: Flame Rated Wear Resistant&& Product Description Supplier Lin Gen Generic PPS Material Status Commercial: Active Features…
About Irradiation cross-linked low-smoke halogen-free flame retardant polyolefin wire & cable compound is environmental flame retardant material with hydroxide as main flame retardant elements. Dehydration endothermic and carbonize play the flame retardant performance. Irradiation cross-linked low-smoke halogen-free flame retardant polyolefin…
About Product Description Supplier SABIC Generic PC+ABS Material Status Commercial: Active Features Halogen free,Flame Characteristics,Heat Resistance, Good Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained…
About ISPLEN® PP 094 N2M is a polypropylene homopolymers of very high fluidity intended for injection moulding. It is a nucleated grade and is characterised by good flow properties that facilitates an easy mould filling and short cycle times. Due…
About 40-3911 is an electrically conductive epoxy adhesive. 40-3911 is formulated without solvents and is therefore a 100% solids system. It is highly filled with silver resulting in a volume resistivity of 5 X 10^4 ohm-cm. This one component system…
About Polyphenylene sulfide&& Product Description Supplier Shunyan Generic PPS Material Status Commercial: Active Features V-0 Availabilitys Asia Pacific Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density — 1.66 g/cm³ ASTM D792 23℃ 1.66 g/cm³…