About DI-PAK E-4701, E-4951 and E-4501 Easily pourable, thermally conductive, shock resistant potting compounds that are ideally suited for low and high production applications. This series of DI-PAK products reduce rejects by exhibiting extremely low stress on potted components. All…
About ebalta GH 781 is a heat resistant two components epoxy resin with very low thermal expansion and high mechanical strength. ebalta GH 781 is suitable to pour on a cast aluminium carrier (sandblast surface). With a thickness of 10-20…
About EPO-TEK ® H20E-8 is a two component, silver-filled epoxy system designed specifically for chip bonding in microelectronic and optoelectronic applications. It is a higher viscosity and higher thixotropic version of EPO-TEK® H20E.&& Product Description Generic 环氧树脂 Material Status Commercial:…
About Product Description Supplier Hersbit Generic TPE Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…
About Rilsan ® PA11 P40 BLACK is a black colored polyamide 11 produced from a renewable source. This grade is plasticized and designed for extrusion. MAIN APPLICATIONS Fluid transportation.&& Product Description Supplier Arkema Generic PA 11 Material Status Commercial: Active…
About SABIC® STAMAX 20YK270EE is a 20% long glass fiber reinforced low emission grade with improved impact and flow properties. The glass fibers are chemically coupled to the PP matrix, resulting in high stiffness and strength. IMDS ID: 577962470 Product…
About Cables using LD 1333 and manufactured under sound commercial fabrication conditions meet the following specifications: AS 1049-1986 Type 03S ASTM D1248, II A5, Grade E5 REA PE200, Appendix A US Federal LP-390C II-L, Grade III, Category 5 US Western…
About This resin is a photo-curable resin that quickly and three-dimensionally cures by radical polymerization that occurs with electron beam (EB) or ultraviolet ray (UV) irradiation. This resin has been used widely for various applications. Type: Acrylic polymer Characteristics: Anti-static…
About KRALASTIC® AN-491 R-1 is an Acrylonitrile Butadiene Styrene (ABS) material. It is available in Asia Pacific or North America for injection molding. Important attributes of KRALASTIC® AN-491 R-1 are: Flame Rated Flame Retardant UV Resistant&& Product Description Supplier Nippon…
About EXCELLEN® VL VL200 is a Very Low Density Polyethylene material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.&& Product Description Supplier Sumitomo Generic VLDPE Material Status Commercial: Active Availabilitys Africa &…