About Glass Fiber – PTFE Lubricated&& Product Description Generic Polycarbonate Material Status Commercial: Negative Features Lubricating,V-1 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.40 g/cm³…
About Sinvicomp DBS9610 is a Rigid Polyvinyl Chloride material. It is available in Asia Pacific for extrusion. Primary attribute of Sinvicomp DBS9610: Impact Resistant. Typical application of Sinvicomp DBS9610: Plumbing/Piping/Potable Water&& Product Description Supplier Teknor Apex Generic PVC，刚硬 Material Status…
About Flexible and non-halogenated flame retardant extrusion grade intended for evaluation in applications such as insulation materials. Flame retardant performance capable of meeting UL 1581 VW-1 requirement. 90C or 105C temperature rating as defined by UL 62 TPE category. 91…
About Fine powder G2 grades&& Product Description Supplier Kuraray Generic PVOH Material Status Commercial: Active Features Biodegradable,Water soluble Availabilitys North America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Solution viscosity 17 to 20 mPa·s DIN 53015 Ash Content…
About CONTINUUM™ DMDC-1250 NT 7 High Density Polyethylene Resin (HDPE) is intended for use in both compression and injection molded closure applications including carbonated soft drink and hot fill closures. Its unique properties also make it suitable for living hinge…
About All Politem Plastik Polyamide Resins are recycled from Post Industrial Fiber Waste Streams&& Product Description Generic PA66 Material Status Commercial: Active Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density…
About LEXAN HF1840R polycarbonate resin, MVR (300C) 36 cm3/10min, extreme low viscosity, injection molding, mold release, transparent. FDA foodcontact compliant in limited colors. FDA 21CFR177.1580, European food contacto regulation EC Directive 2002/72/EC.&& Product Description Supplier SABIC Generic Polycarbonate Material Status…
About AVALON 95 AEU is a high performance UV-stabilised polyester based thermoplastic polyurethane for injection moulding. AVALON 95 AEU is part of the AVALON Perform Range and offers a premium soling material for the sporting goods and fashion markets and…
About Delon 6055 is a Thermoplastic Elastomer, Ether-Ester (TEEE) material. It is available in Asia Pacific for blow molding, extrusion, or injection molding. Important attributes of Delon 6055 are: Chemical Resistant Copolymer Creep Resistant Good Processability High Toughness Typical applications…
About Petrothene NA336 is a series of homopolymer resins selected by customers for applications that require thin gauge film constructions. NA336 resins are known for their consistency, excellent drawdown and processability.&& Product Description Supplier LyondellBasell Generic LDPE Material Status Commercial:…