About High impact PA/ABS blend with reduced moisture absorption and improved flowability UV stabilizer For increased requirements of impact strength and low-temperature impact strength. For injection molded parts&& Product Description Supplier TER Generic PA 6+ABS Material Status Commercial: Active Features…
About ICORENE® 3440 is a Polyethylene Copolymer (PE Copolymer) product. It can be processed by rotational molding and is available in Latin America. Typical application: Food Contact Applications. Characteristics include: Butene Comonomer Copolymer Food Contact Acceptable Good Processability Good Stiffness&&…
About Polypropylene copolymer reinforced with 20weight percent long glass fibers. Low emission. The fibers are chemically coupled to the polypropylene matrix. The pellets are cylindrical and normally as well as the embedded fibers 10 mm long.(-0553 = Low emission grade)…
About Additive free LDPE homopolymer extrusion coating, injection moulding and compounding product Benefits & Features 19N430B special polymer structure gives the following properties: For extrusion coating: Well balanced Neck In and Draw Down performance Good adhesion performance and sealing properties…
About 100% modified PTFE&& Product Description Generic PTFE Material Status Commercial: Active Features Moderate liquidity Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 2.18 g/cm³ ASTM D4894 Apparent density 0.68…
About Extrusion Grade&& Product Description Supplier DSM Generic TPC-ET Material Status Commercial: Active Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Extrusion Technical Data PHYSICAL Nominal value Unit Test method Density 1.13 g/cm³ ISO 1183 Melt Volume…
About Jackdaw PLA HW18NT6651是一种聚乳酸 (PLA)产品,。 它,在欧洲有供货。 主要特性为:环保/绿色。&& Product Description Generic PLA Material Status Commercial: Active Features Renewable resources Availabilitys Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.28 g/cm³ ASTM D792, ISO 1183 Melt Flow Rate 170℃，2.16kg 1.2…
About Hostacom HYP 376D NAT is an over 40% chalk filled PP homopolymer, with good detergent resistance, very good mouldability and high flowability. Please contact Basell for shrinkage recommendations. This grade is not intended for medical, pharmaceutical, food, drinking water…
About CMET TSR-832 is an Epoxy; Epoxide (Epoxy) material. It is available in Asia Pacific or North America for 3d printing, stereolithography.&& Product Description Generic 环氧树脂 Material Status Commercial: Active Availabilitys North America,Asia Pacific Technical Data PHYSICAL Nominal value Unit…
About Iupilon® EFD2110U is a Polycarbonate (PC) material. It is available in Asia Pacific, Europe, or North America for injection molding. Primary attribute of Iupilon® EFD2110U: Flame Rated.&& Product Description Supplier Mitsubishi Generic Polycarbonate Material Status Commercial: Active Features V-0…