About Complet® LBF50-PA66 is a Polyamide 66 (Nylon 66) product filled with 50% basalt fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristic: rohs compliant.&& Product Description Generic PA66 Material Status Commercial: Active Availabilitys North America,Asia…
About Flame retardant ABS standard grade without PBDE and higher stability&& Product Description Supplier A. Schulman Generic ABS Material Status Commercial: Active Features Flame Characteristics,V-0 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data…
About PC-PLA Blend – 32% Renewable Resource Content – Additional 49% Post Consumer Content&& Product Description Generic PLA+PC Material Status Commercial: Negative Features Renewable resources,HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data…
About Titacon® TR905 is an Acetal (POM) Copolymer material filled with 5.0% talc. It is available in Asia Pacific. Important attributes of Titacon® TR905 are: Flame Rated Good Dimensional Stability Warp Resistant&& Product Description Supplier Titan Generic Copolymer Polyformaldehyde Material…
About Torelina® A310E is a Polyphenylene Sulfide (PPS) product filled with 65% glassmineral. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.&& Product Description Supplier Toray Generic PPS Material Status Commercial: Active Features V-0 Availabilitys…
About Product Description Supplier Hersbit Generic TPE Material Status Commercial: Active Features Soft,Good coloring Technical Data PHYSICAL Nominal value Unit Test method hardness Shaw’s A 50 ASTM D2240 Density 1.01 g/cm³ ASTM D792 MECHANICAL Nominal value Unit Test method tensile…
About Sylvin 9766-90 Black Is A Lower Cost Vinyl Compound Formulated For Injection Molding Applications.&& Product Description Supplier Sylvin Generic PVC, not specified Material Status Commercial: Active Availabilitys North America Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit…
About Plexiglas® V045i is a lightly impact modified thermoplastic acrylic resin formulated for extrusion applications. It is characterized by its chemical and heat resistance as well a high melt flow. It is a tougher resin than Plexiglas® V045 allowing improved…
About High Viscosity&& Product Description Supplier DSM Generic PA66 Material Status Commercial: Active Features High Viscosity Availabilitys Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.14 g/cm³ ISO 1183 Water absorption rate Saturation, 23 ℃ 9.0 % ISO…
About A very wide range of Evoprene™ G compounds is available for applications in all sectors of industry. The range is based on the widely specified SEBS (styrene – ethylene butylene – styrene) and related hydrogenated block copolymers. These polymers…