About Sylvin 8785-75 Grey 9491 Is A Vinyl Compound Formulated For Extruded Waterstop Applications.&& Product Description Supplier Sylvin Generic PVC, not specified Material Status Commercial: Active Features Good Dimensional Stability,High elastic,Hydrolysis stability,Grease resistance Availabilitys North America,Asia Pacific,Europe Process Methods Injection…
About Monprene RG-18108 is a high performance thermoplastic elastomer, available in NAT and colors, intended for use in food contact applications. Monprene RG-18108 is a very soft, low density grade with good adhesion to PP and complies with various US…
About SABIC® PP 504PT is a low fluidity polypropylene homopolymer with consistent processability, easy orientation, low water carry over and good mechanical properties. Product Description Supplier SABIC Generic PP homopolymerization Material Status Commercial: Active Availabilitys Asia Pacific Technical Data PHYSICAL…
About Sylvin 9077-75 Yellow 4181 Is A Vinyl Compound Formulated For Injection Molding Applications. This Compound Has A Underwriters Laboratories Listing As A Recognized Component.&& Product Description Supplier Sylvin Generic PVC, not specified Material Status Commercial: Active Features HB Availabilitys…
About B 4 Venezia is an extrusion grade developed for glossy applications.Easily extrudable even in large sheets, it has high gloss and high modulus. Designation: Thermoplastic ISO 2580-ABS 1,EGN,105-04-16-20 Applications It’s used in sectors that need high gloss and good…
About PP 3495 is a high flow, high impact copolymer polypropylene suitable for injection molding applications specified by Toyota TSM 5514G-3A, and which require a material with the following properties.&& Product Description Supplier A. Schulman Generic PP homopolymerization Material Status…
About B30G730 is a Polyethylene EBA Copolymer for Blown film Benefits & Features B30G730 is an Ethylene Butyl Acrylate (EBA) copolymer, containing 17% butyl acrylate. Applications B30G730 has been developed to give a strong and elastic film with low gel…
About Product Description Generic PP not specified Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Burn residue 0 % ASTM D5630 Density 0.93 g/cm³ ASTM D792 Water absorption rate 0.03 % ASTM D570 Shrinkage rate MD…
About Data was measured on natural colored test specimens.&& Product Description Generic Polycarbonate Material Status Commercial: Active Features Foaming performance,V-2,V-0 Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method Density 0.998 g/cm³ ASTM D792 Melt Flow Rate 8.0…
About Glass Fiber&& Product Description Generic TPI Material Status Commercial: Negative Features V-0 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.54 g/cm³ ASTM D792 Shrinkage…