About Tenite™ cellulosic plastics are noted for their excellent balance of properties – toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties of Tenite™ cellulosic plastics differ with plasticizer levels. Lower plasticizer content yields a harder…
About Milastomer™ 8032NS is a Thermoplastic Vulcanizate (TPV) material. It is available in North America for extrusion or injection molding. Typical applications include: Engineering/Industrial Parts Handles&& Product Description Supplier Mitsui Generic TPV Material Status Commercial: Active Availabilitys North America Process…
About BYNEL® Series 3100 resins are acid/acrylate-modified ethylene vinyl acetate polymers. They are available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene (PE) resins. BYNEL 3100 series resins adhere to a wide variety…
About PRODUCT DESCRIPTION: SABIC® LDPE HP2027N is a Low Density Polyethylene grade without slip and anti-block additives, with increased density. It typically exhibits better draw down ability with high output. Films typically exhibit excellent optics and good heat seal properties…
About Kingfa GFABS-10 is an Acrylonitrile Butadiene Styrene (ABS) material filled with 10% glass fiber. It is available in Asia Pacific or North America for injection molding. Important attributes of Kingfa GFABS-10 are: Flame Rated Good Dimensional Stability Low Shrinkage…
About UL 94 V0 at 1,6 mm, copolymer, halogen free, excellent electrical properties, RoHS.&& Product Description Generic PP copolymer Material Status Commercial: Active Features Good Electrical Properties,Halogen free,Copolymer,V-2 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL…
About Baytec MS-052 is a modified diphenylmethane diisocyanate (MDI)-terminated polyester prepolymer used in the manufacture of high-property solid cast polyurethane elastomers. When extended with 1,4-butanediol, this material complies with FDA regulation 21 CFR 177.2600 (Rubber Articles Intended for Repeated Use)…
About Custom Molding&& Product Description Supplier Polyone Generic PVC alloy Material Status Commercial: Active Features Low Light Diffusion,High liquidity Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.27 g/cm³ ASTM…
About Romiloy® 8150 is a Polycarbonate + ASA (PC+ASA) material. It is available in Europe for extrusion or injection molding. Important attributes of Romiloy® 8150 are: Flame Rated Halogen Free Flame Retardant&& Product Description Generic ASA+PC Material Status Commercial: Active…
About Torlon® AI-30 LM is a wet polymer granule developed for the performance coatings industry. This polyamide-imide precursor consists of roughly 35% polymer solids, 63% water and 2% NMP. The high acid number of the polymer backbone allows the formulation…