About Fluon®PFA is a copolymer of tetrafluoroethylene (C2F4) and perfluoroalkoxyethylene, which has excellent chemical, electrical, mechanical and surface properties. PFA retains many inherent characteristics and similar properties to PTFE but can be processed using conventional thermoplastic techniques, such as extrusion,…
About TIPPLEN K 693 is a high molecular weight impact copolymer polypropylene for the extrusion and injection moulding applications. TIPPLEN K 693 offers excellent impact strength, good stiffness and excellent processability. TIPPLEN K 693 is recommended for medium-low weight corrugated…
About ALCUDIA® TR-135 natural compound is an hexene copolymer of high molecular weight especially apt for the extrusion of pipe. Because other good mechanical properties and their characteristics, the polyethylene natural compound ALCUDIA® TR-135, is designed to produce pipe. It…
About Dion VER 9100 is a Vinyl Ester product. It can be processed by filament winding, hand lay-up, or laminating and is available in North America. Typical application: Coating Applications. Primary characteristic: chemical resistant.&& Product Description Generic 乙烯基酯 Material Status…
About Material code according to ISO 1043-1: PP Polypropylene with 40 weight percent ash content, long glass fibers reinforced. The fibers are chemically coupled to the polypropylene matrix. The pellets are cylindrical and normally as well as the embedded fibers…
About Hiprolon ® 400 MNWHL G15 is a polyamide 10.12 produced from a renewable source and reinforced with 15% glass fiber. This black grade is designed for injection molding. MAIN APPLICATIONS Injection molding.&& Product Description Supplier Arkema Generic PA 1012…
About Grilamid® XE 3959 black 9992 is a Polyamide 610 (Nylon 610) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for extrusion. Important attributes of Grilamid® XE 3959 black 9992 are:…
About Product Information: TPO’s are a family of thermoplastic elastomers which exhibit rubber-like properties and are processable on conventional thermoplastic equipment. Features: Tear Resistance, High UV Resistance, Good Density, Low Wide service range from -20 degrees C to 120 degrees…
About Special Grade for Light Guiding Plates&& Product Description Supplier Asahi Kasei Generic PMMA Material Status Commercial: Active Availabilitys Africa & Middle East ,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.19 g/cm³ ISO 1183 Melt Flow…
About SABIC® PPcompound 9154 is a development grade, elastomer-modified mineral filled Polypropylene for automotive interior applications. This material has been designed to combine a good performance profile with good processing. SABIC® PPcompound 9154 is a designated automotive grade.&& Product Description…