About (DOMAMID 6G30AF1) Polyamide 6, 30% glass fiber reinforced, high flowability, improved surface finish, for injection moulding&& Product Description Supplier DOMO Generic PA6 Material Status Commercial: Active Features High liquidity Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data…
About Silopren LSR 2650 is a two-component liquid silicone rubber for injection molding processes. In comparison to Silopren LSR 2050, Silopren LSR 2650 shows a lower viscosity, improved tear resistance and a higher reactivity. Therefore, it is also possible to…
About Dryflex A thermoplastic elastomer (TPE) bondable grades, primarily based on SBS and SEBS, increase freedom of design and open up a vast range of application opportunities. It used to be a complex and costly affair producing details made of…
About Cevian® K18 is an Acrylic product. It is available in North America.&& Product Description Supplier Daicel Generic SMMA Material Status Commercial: Active Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method Density 1.19 g/cm³ ASTM D792 Melt…
About Ni Series – TPV Elastoprene® It is a mixture of polypropylene and dynamically vulcanised EPDM rubber (PP/EPDM), with properties similar to those of other rubber products but with better results than traditional plastic materials. It has good resistance to…
About Product Description Supplier TOSOH Material Status Commercial: Negative Features Lubricating,Good Dimensional Stability Technical Data THERMAL Nominal value Unit Test method Hot deformation temperature 0.45 MPa >260 ℃ ISO 75 1.8 MPa >260 ℃ ISO 75 TD 2.4 ISO 11359…
About CONATHANE EN-2552 is a filled two-component urethane system designed for use as a potting and encapsulating material for electronic components where critical thermal cycling characteristics are a factor. CONATHANE EN-2552 has excellent electrical properties, low shrinkage, low stress buildup,…
About RAMSHINE PJ702RD80 is Red , UV Stabilized ASA/ABS, Injection Molding Applications Product Description Supplier Ram-On Generic ASA+ABS Material Status Commercial: Active Features Weather resistance is good Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding…
About Hostacom TRC 2016N is a 10% talc filled PP copolymer, with high flowability, good impact/stiffness balance, high UV resistance, very good scratch resistance and low emissions. Advanced technologies allowed for a significant reduction of mineral filler which contributed to…
About ARCEL® ULV (1.25 pcf) is a Polystyrene + PE (PS+PE) material. It is available in North America for foam processing.&& Product Description Generic PS+PE Material Status Commercial: Active Availabilitys North America Process Methods Foam treatment Technical Data PHYSICAL Nominal…