About Network Polymers PC 1029 is a Polycarbonate (PC) product. It is available in North America. Typical application: Food Contact Applications. Characteristics include: Flame Rated Food Contact Acceptable&& Product Description Generic Polycarbonate Material Status Commercial: Active Features Food contact compliance,V-2…
About Features Non-Reinforced/Filled, Wear Resistance&& Product Description Supplier Mitsui Generic TPI Material Status Commercial: Negative Features Good wear resistance Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.43 g/cm³ ASTM D792 Shrinkage rate Internal Method…
About ETP polymer. This peroxide cured compound is based on a tetrapolymer of Ethylene, Tetrafluoroethylene (TFE) and Perfluoromethylvinylether (PMVE), and a cure site monomer – 70-80 °IRHD. This compound offers a higher level of fluid resistance than that of fluoroelastomers.…
About Pearlcoat® 127K is an aromatic polyester-based thermoplastic polyurethane. Main Application : Meltcoating Special Features : Combining hardness with excellent low temperature flexibility and medium softening point.&& Product Description Supplier Lubrizol Advanced Materials Generic TPU-酯 Material Status Commercial: Active Features…
About Product Description Supplier DOMO Generic PA66 Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…
About RJM 901-M is an Acetal (POM) Copolymer product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Additive Characteristics include: Flame Rated Lubricated&& Product Description Generic Copolymer Polyformaldehyde Material Status…
About Our new crosslinkable CompaMid® PA 6 compounds are thermoplastic polymers which behave like elastomers over a wide temperature range as a result of beta radiation cross-linking. Thanks to crosslinking, the originally thermoplastic material can withstand significantly higher temperatures of…
About Sup-tech B101EX is a Polyamide 6 (Nylon 6) product. It can be processed by extrusion or injection molding and is available in Asia Pacific. Primary characteristic: flame rated.&& Product Description Supplier Suptech Generic PA6 Material Status Commercial: Negative Features…
About The Medalist MD-53200 Series is a high performance thermoplastic elastomer series, designed to be a sustainable alternative to flexible PVC for medical tubing and film. Medalist MD-53278 is a low density, medium hardness, clear, lubricated grade, available in Nat…
About HYDRIN® ELASTOMERS (CO/ECO/GECO), based on polyepichlorohydrin, have an excellent balance of properties for automobile applications. They exhibit notable low-temperature flexibility and adjustable dampening characteristics in addition to heat, oil and fuel resistance. More recently, Hydrin elastomers have shown a…