About POM copolymer Injection molding grade with tribological modification for demanding applications that require prevention of audible noise caused by stick-slip phenomenon. Excellent tribological performance with low friction and low wear under various conditions of sliding against plastics and metals.…
About PBT/ASA Glass fibre reinforced&& Product Description Supplier Polykemi Generic PBT+ASA Material Status Commercial: Active Features HB Availabilitys Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.48 g/cm³ ISO 1183 Melt Flow Rate 275℃，2.16kg 23 g/10min ISO…
About PC/ABS Alloy : Non Reinforced Grade Classification: General purpose>Injection grade Characteristic: Injection grade, Ultra high impact Resistance Application GAC 265 resin gives exceptional impact strength even at low temperature and has a highheat resistance. Typical applications include automotive instrument…
About OXPEKK® MG240C is a Polyetherketoneketone (PEKK) material filled with 40% carbon fiber. It is available in Europe or North America. Typical application of OXPEKK® MG240C: Medical/Healthcare&& Product Description Generic PEKK Material Status Commercial: Active Availabilitys North America,Europe Technical Data…
About Product Description Supplier DS TECH Generic TPU Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 23℃ 1.22-1.24 g/cm³ ASTM D792 Melt Flow Rate 215℃，10kg 30±10 g/10min ASTM D1238 Shrinkage rate 23℃ 1.0-1.4 % ASTM…
About 55 Shore D, Renewably Sourced, High Viscosity Polyester Elastomer with Good Heat Ageing Protection Developed for Blow Molding&& Product Description Supplier DuPont Generic TPC-ET Material Status Commercial: Active Features Heat Stabilized,HB Availabilitys Africa & Middle East ,North America,Latin America,Asia…
About Uncoated Permeable Films Transparent film for applications where protection from moisture is not required Literature reference: A200&& Product Description Generic 再生纤维 Material Status Commercial: Negative Features Good Clarity,Renewable resources,Biodegradable Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical…
About PURGE COMPOUND FOR SCREW AND BARREL Special grade to clean PP Temperature range: 170°C – 300°C ASACLEAN ® UP is especially designed to purge polypropylene. The fields of appliance are Injection Moulding Extrusion It is characterized by the well…
About Coarsely woven cotton fabric, phenolic resin impregnated Applications: Rollneck-bearings Coverts for friction rolls&& Product Description Generic 酚醛树脂 Material Status Commercial: Active Availabilitys North America,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.35 g/cm³ ISO 1183 IMPACT Nominal…
About 50-3182 NC is a highly filled epoxy system with excellent physical, electrical, and thermal properties. 50-3182 NC offers very high thermal conductivity, excellent electrical insulation, and low thermal expansion. This unique combination of properties makes this system ideal for…