| About |
|---|
| Promyde® B33UV is a Polyamide 6 grade of medium viscosity with UV protection. The polymer is suitable for all type of extrusion applications like the production of high tenacity yarns.&& |
| Product Description | |
|---|---|
| Generic | PA6 |
| Material Status | Commercial: Active |
| Features | Weather resistance is good |
| Availabilitys | Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.13 | g/cm³ | ISO 1183 |
| Apparent density | 0.69 | g/cm³ | Internal Method |
| water content | < 0.10 | % | Internal Method |
| Relative viscosity | 3.21 to 3.41 | ISO 1628 | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | |||
| DSC | 220 | ℃ | ISO 3146 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Chip Size | 2.50 | mm | Internal Method |
| Monomers | < 0.60 | % | ISO 599 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. NAPPA-059 |
| 3. NAPPA-032 |
| 4. NAPPA-045 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |