| About |
|---|
| ProPolymers PEI 1010 is a high flow, general purpose polyetherimide that offers a superior combination of mechanical, electrical, and thermal properties. PEI is inherently flame resistant with low smoke emission. It provides outstanding processability and good chemical resistance.&& |
| Product Description | |
|---|---|
| Generic | Polyetherimide |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Low smoke,High liquidity,Flame Characteristics,High Heat Resistance,Solvent resistance |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.27 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 337℃，6.60kg | 18 | g/10min | ASTM D1238 |
| Shrinkage rate | ASTM D955 | ||
| MD | 0.50 to 0.80 | % | ASTM D955 |
| TD | 0.60 to 0.90 | % | ASTM D955 |
| Water absorption rate | |||
| 24hr | 0.25 | % | ASTM D570 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 32 | J/m | ASTM D256 |
| Impact strength of cantilever beam notch | 5.00 | kJ/m² | ASTM D256 |
| Notched impact strength of cantilever beam | 1300 | J/m | ASTM D256 |
| Notched impact strength of cantilever beam | 140 | kJ/m² | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | ASTM D648 | ||
| 0.45 MPa, unannealed | 207 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed | 199 | ℃ | ASTM D648 |
| Vicat Softening Temp | 219 | ℃ | ASTM D1525 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| M-level | 109 | ||
| tensile strength | |||
| yield | 110 | MPa | ASTM D638 |
| Tensile strain | ASTM D638 | ||
| yield | 60 | % | ASTM D638 |
| fracture | 7.0 | % | ASTM D638 |
| Bending modulus | 3590 | MPa | ASTM D790 |
| bending strength | 162 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |