Propylux® SD-A

About
PROPYLUX® SD-A (Static-dissipative Polypropylene) Non-carbon-filled, permanently static-dissipative material, with good chemical resistance and mechanical properties. This material is light weight, weldable, easily machined and fabricated, available in natural or black color, and has moderate transparency at thinner gauges. Advantages: Very good chemical resistance Easily machined Cost effective Durable Lightweight Weldable Applications: Semiconductor/electronic components Automotive assembly equipment Business machine manufacturing components Explosives handling equipment&&

About

PROPYLUX® SD-A (Static-dissipative Polypropylene) Non-carbon-filled, permanently static-dissipative material, with good chemical resistance and mechanical properties. This material is light weight, weldable, easily machined and fabricated, available in natural or black color, and has moderate transparency at thinner gauges. Advantages: Very good chemical resistance Easily machined Cost effective Durable Lightweight Weldable Applications: Semiconductor/electronic components Automotive assembly equipment Business machine manufacturing components Explosives handling equipment&&

Product Description
Supplier	Westlake Plastics
Generic	PP not specified
Material Status	Commercial: Active
Features	Machinable,Durability,Solvent resistance,Antistatic property,Welding,HB
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.938	g/cm³	ASTM D792
Water absorption rate
24hr	1.0	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	75	J/m	ASTM D256
Notched impact strength of cantilever beam	无断裂		ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature			ASTM D648
0.45 MPa, unannealed	108	℃	ASTM D648
1.8 MPa, unannealed	57.2	℃	ASTM D648

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	1.0E+9 to 1.0E+11	ohms	ASTM D257
Volume resistivity	1.0E+9 to 1.0E+11	ohms·cm	ASTM D257
Electrostatic attenuation	< 0.3	sec	MIL B-81705

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	HB		UL 94

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	72		ASTM D2240
tensile strength
yield	30.3	MPa	ASTM D638
Tensile strain
fracture	200	%	ASTM D638
Bending modulus	1380	MPa	ASTM D790
bending strength	42.7	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.