| About |
|---|
| ProvaMed® TPE 1180 is a Thermoplastic Elastomer (TPE) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of ProvaMed® TPE 1180 are: Sterilizable Biocompatible Typical application of ProvaMed® TPE 1180: Medical/Healthcare&& |
| Product Description | |
|---|---|
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | High impact resistance,High liquidity,Quick molding cycle,Good stripping performance |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.890 | g/cm³ | ISO 1183 |
| Melt Flow Rate | ISO 1133 | ||
| 190℃，2.16kg | 18 | g/10min | ISO 1133 |
| 190℃，5.0kg | 75 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shore A, 5 seconds | 80 | ASTM D2240 | |
| Shaw’s D, 5 seconds | 21 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 9.00 | MPa | DIN 53504 |
| 100% strain | 4.10 | MPa | DIN 53504 |
| Tensile strain | |||
| fracture | 990 | % | DIN 53504 |
| Compression deformation | ISO 815 | ||
| 23℃，22 hr | 37 | % | ISO 815 |
| 70℃，22 hr | 60 | % | ISO 815 |
| 100℃，22 hr | 76 | % | ISO 815 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | -53.0 | ℃ | DSC |
| Melting temperature | |||
| DSC | 159 | ℃ | DSC |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Hopper temperature | 20 to 30 | °C | |
| Barrel rear temperature | 140 to 230 | °C | |
| Barrel middle temperature | 140 to 230 | °C | |
| Barrel front temperature | 140 to 230 | °C | |
| Nozzle temperature | 190 to 230 | °C | |
| Mold temperature | 20 to 60 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Heating rate 10 K/min Melting peak from second heating cycle |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |