Provista™ Copolymer MP002

About
Eastman Provista™ Copolymer MP002 is a resin specifically developed for extrusion into profiles for medical applications where aesthetics such as high clarity and gloss, coupled with design flexibility and enhanced toughness, drive demand. Compared to commonly used materials, Eastman Provista™ copolymer runs on most standard processing equipment at increased speeds. Extremely high melt strength makes the resin an excellent choice when extruding profiles into complicated shapes. In addition to profile extrusion, Eastman Provista™ copolymer is an excellent choice for extrusion of rigid tubing. This product meets the biocompatibility requirements under FDA/ISO 10993 and USP Class 6, Plastics. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.&&

About

Eastman Provista™ Copolymer MP002 is a resin specifically developed for extrusion into profiles for medical applications where aesthetics such as high clarity and gloss, coupled with design flexibility and enhanced toughness, drive demand. Compared to commonly used materials, Eastman Provista™ copolymer runs on most standard processing equipment at increased speeds. Extremely high melt strength makes the resin an excellent choice when extruding profiles into complicated shapes. In addition to profile extrusion, Eastman Provista™ copolymer is an excellent choice for extrusion of rigid tubing. This product meets the biocompatibility requirements under FDA/ISO 10993 and USP Class 6, Plastics. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.&&

Product Description
Supplier	Eastman
Generic	热塑性聚酯
Material Status	Commercial: Active
Features	Good Clarity,Good flexibility,Good surface appearance,Biocompatible,Good melt strength
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Profile extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.25	g/cm³	ASTM D792
Shrinkage rate
MD	0.30	%	ASTM D955
colour			ASTM D2244
a	-0.20		ASTM D2244
b	0.60		ASTM D2244
L	95		ASTM D2244

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-40℃	63	J/m	ASTM D256
23℃	No Break		ASTM D256
Impact strength of cantilever beam notch			ASTM D4812
-40℃	No Break		ASTM D4812
23℃	No Break		ASTM D4812
Dart impact equipped with measuring instruments			ASTM D3763
-40℃，Energy at Peak Load	39.0	J	ASTM D3763
0℃，Energy at Peak Load	41.0	J	ASTM D3763
23℃，Energy at Peak Load	41.0	J	ASTM D3763

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	63.0	℃	ASTM D648
0.45 MPa, unannealed	73.0	℃	ASTM D648
Vicat Softening Temp	85.0	℃	ASTM D1525

optical performance	Nominal value	Unit	Test method
gloss
60°	143		ASTM D2457
Transmittance			ASTM D1003
total	91.0	%	ASTM D1003
Regular	87.0	%	ASTM D1003
Haze	1.3	%	ASTM D1003

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
23℃	1900	MPa	ASTM D638
tensile strength
Fracture, 23 ℃	48.0	MPa	ASTM D638
Yield, 23 ℃	47.0	MPa	ASTM D638
Tensile strain
Fracture, 23 ℃	300	%	ASTM D638
Yield, 23 ℃	5.0	%	ASTM D638
Bending modulus
23℃	1900	MPa	ASTM D790
bending strength
23℃	65.0	MPa	ASTM D790
Rockwell hardness
R-level	105		ASTM D785

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.