PSM® HL-301B - SOLIAO

About
PSM® HL-301B is a Thermoplastic material. It is available in Asia Pacific. Primary attribute of PSM® HL-301B: Eco-Friendly/Green.&&

Product Description
Supplier	Huali
Generic	热塑性聚酯
Material Status	Commercial: Active
Features	Biodegradable
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.14 to 1.50	g/cm³	ISO 1183
Melt Flow Rate	2.5 to 5.2	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
tensile strength	15.0 to 17.0	MPa	ISO 527-2
Nominal tensile fracture strain	600 to 700	%	ISO 527-2

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp
B120	> 75.0	℃	ISO 306/B120

Supplementary information	Nominal value	Unit	Test method
Cleanliness	< 5.00	pcs/100 g

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.