| About |
|---|
| PTS PBT-1100 is a Polybutylene Terephthalate (PBT) product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Characteristics include: Chemical Resistant Good Processability Wear Resistant&& |
| Product Description | |
|---|---|
| Generic | polybutylene terephthalate |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Electrical Properties,Low coefficient of friction,Good wear resistance,Solvent resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.29 to 1.33 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 250℃，2.16kg | 30 to 45 | g/10min | ISO 1133 |
| Color b（Hunter Lab photometer） | < 6.00 | Internal Method | |
| Intrinsic viscosity | 0.98 to 1.0 | dl/g | ISO 1628-5 |
| water content | |||
| Loss on drying | < 0.30 | % | ISO 15512 |
| Ash Content | < 0.035 | % | ISO 3451-1 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 222 to 226 | ℃ | ISO 11357-3 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| End carboxyl group content | |||
| Potentiometric titration method | < 30.0 | mol/t | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Dipping/distilled water |
| 3. Phenol – tetrachloroethane |
| 4. Calcinations |
| 5. Pellet, C/2° light |
| 6. 10°C/min |
| 7. Phenol – chloroform dissolvant |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |