| About |
|---|
| CPE-8090 is Lower molecular weight than 135A, better processibility, suitable for higher speed extrusion.&& |
| Product Description | |
|---|---|
| Supplier | Pujie |
| Generic | CPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Low molecular weight |
| Availabilitys | Asia Pacific |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | > 0.50 | g/cm³ | |
| Chlorine content | 34.0 to 36.0 | wt% | |
| Sieve Residue（40 Mesh） | > 98.0 | ||
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Fusion heat | < 2.00 | J/g |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Impurities | < 25.0 | pcs/50 g | |
| Whiteness（E457） | > 90.0 | ° | |
| volatility | < 0.50 | % | |
| decomposition temperature | > 170 | ℃ |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | < 58 | ||
| tensile strength | > 8.00 | MPa | |
| Tensile strain | |||
| fracture | > 700 | % |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |