| About |
|---|
| PULSE 2013 is a talc-filled PC/ABS which provides an optimized balance of properties with low CLTE. This grade is precolored black. Applications: Automotive exterior painted trim applications that require enhanced dimensional stability. Suitable for injection molding.&& |
| Product Description | |
|---|---|
| Supplier | Trinseo |
| Generic | PC+ABS |
| Material Status | Commercial: Active |
| Features | Good Dimensional Stability |
| Availabilitys | North America,Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.24 | g/cm³ | ISO 1183/A |
| Apparent density | 0.74 | g/cm³ | ISO 60 |
| Melt Flow Rate | |||
| 230℃，3.80kg | 2.9 | g/10min | ISO 1133 |
| Shrinkage rate | ISO 294-4 | ||
| TD | 0.42 | % | ISO 294-4 |
| MD | 0.35 | % | ISO 294-4 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 4310 | MPa | ISO 527-2/50 |
| tensile strength | |||
| fracture | 48.9 | MPa | ISO 527-2/50 |
| yield | 60.8 | MPa | ISO 527-2/50 |
| Tensile strain | |||
| fracture | 4.7 | % | ISO 527-2/50 |
| yield | 3.0 | % | ISO 527-2/50 |
| Bending modulus | 3950 | MPa | ISO 178 |
| bending strength | 95.0 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30℃ | 6.0 | kJ/m² | ISO 179/1eA |
| 23℃ | 6.5 | kJ/m² | ISO 179/1eA |
| Impact strength of cantilever beam notch | ISO 180/A | ||
| -30℃ | 5.8 | kJ/m² | ISO 180-A |
| 23℃ | 6.2 | kJ/m² | ISO 180-A |
| Dart impact equipped with measuring instruments | |||
| -30℃，Peak Energy | 37.2 | J | |
| 23℃，Peak Energy | 32.8 | J |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 108 | ℃ | ISO 75-2/A |
| 0.45 MPa, unannealed | 124 | ℃ | ISO 75-2/B |
| Vicat Softening Temp | |||
| B50 | 122 | ℃ | ISO 306 |
| Linear coefficient of thermal expansion | |||
| TD：-30~80℃ | 5.8E-5 | 1/℃ | ISO 11359-2 |
| MD：-30~80℃ | 4.5E-5 | 1/℃ | ISO 11359-2 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |