Purac PLA Blend A

About
Homo PLA: general purpose PLA blends based on monomers from Purac offer: Heat resistance up to 120°C (HDT B) Good processing economics Impact resistance comparable to ABS Biobased content Multiple end-of-life options Existing commercial availability Blend A: the key driver behind this improvement are PLLA homopolymers that have been nucleated with a small amount of PDLA homopolymers and a traditional nucleant (see blend A in the table below for more details). The increased heat performance of blend A was obtained without adding significant amounts of filler.&&

About

Homo PLA: general purpose PLA blends based on monomers from Purac offer: Heat resistance up to 120°C (HDT B) Good processing economics Impact resistance comparable to ABS Biobased content Multiple end-of-life options Existing commercial availability Blend A: the key driver behind this improvement are PLLA homopolymers that have been nucleated with a small amount of PDLA homopolymers and a traditional nucleant (see blend A in the table below for more details). The increased heat performance of blend A was obtained without adding significant amounts of filler.&&

Product Description
Generic	PLA
Material Status	Commercial: Active
Features	Renewable resources,Nucleation,High Heat Resistance,Homopolymer
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.24	g/cm³

MECHANICAL	Nominal value	Unit
Tensile modulus	3000	MPa
tensile strength	45.0	MPa
Tensile strain
fracture	5.0	%

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	5.0	kJ/m²

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	105	℃

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	190 to 220	°C
Mold temperature	80 to 100	°C

Notes
1. Typical properties: these are not to be construed as specifications.
2. Flatwise
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.