| About |
|---|
| Pure PLA 150是一种聚乳酸 (PLA)材料,。 该产品在北美洲、非洲和中东、欧洲或亚太地区有供货,加工方式为:吹塑薄膜、纤维（纺纱）挤出或注射成型。 Pure PLA 150的主要特性有: 通过 ROHS 认证 环保/绿色 美观 加工性能良好 晶体 典型应用领域包括: 包袋/内衬 电影 添加剂/色母粒 无纺布 |
| Product Description | |
|---|---|
| Generic | PLA |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good surface appearance,Renewable resources,Biodegradable,Food contact compliance,Compostable,High crystallization,Amorphous |
| Availabilitys | Africa & Middle East ,North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.25 | g/cm³ | |
| Melt Flow Rate | 5.0 to 9.0 | g/10min | |
| Purity – Optical (% D-isomer) | < 0.3 | ||
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 3000 to 3500 | MPa | |
| Tensile stress | 60.0 to 70.0 | MPa | |
| Tensile strain | |||
| fracture | 2.0 to 8.0 | % |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Notched impact strength of cantilever beam | 2.0 to 4.0 | kJ/m² |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | 63.0 to 73.0 | ℃ | |
| Melting temperature | 175 to 185 | ℃ |
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| drying temperature | 80 to 100 | °C | |
| Drying time | 2.0 to 4.0 | hr | |
| Hopper temperature | 20 to 40 | °C | |
| Temperature at the rear of the barrel | 180 to 200 | °C | |
| Temperature in the middle of the barrel | 180 to 200 | °C | |
| Front temperature of material barrel | 180 to 200 | °C | |
| Nozzle temperature | 180 to 200 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |