| About |
|---|
| Pure PLA 180是一种聚乳酸 (PLA)材料,。 该产品在北美洲、非洲和中东、欧洲或亚太地区有供货,加工方式为:挤出、热成型、纤维（纺纱）挤出或注射成型。 Pure PLA 180的主要特性有: 通过 ROHS 认证 环保/绿色 美观 高分子量 加工性能良好 典型应用领域包括: 薄板 纺织/纤维 瓶子 |
| Product Description | |
|---|---|
| Generic | PLA |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good surface appearance,Low liquidity,Renewable resources,Biodegradable,Food contact compliance,High molecular weight,Compostable,Heat Resistance, Good,High crystallization,Amorphous |
| Availabilitys | Africa & Middle East ,North America,Asia Pacific,Europe |
| Process Methods | Thermo forming |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.13 to 1.38 | g/cm³ | |
| Melt Flow Rate | 2.0 to 5.0 | g/10min | |
| Purity – Optical (% D-isomer) | < 0.3 | ||
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 3000 to 3500 | MPa | |
| Tensile stress | 60.0 to 70.0 | MPa | |
| Tensile strain | |||
| fracture | 2.0 to 8.0 | % |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Notched impact strength of cantilever beam | 2.0 to 4.0 | kJ/m² |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | 60.0 to 70.0 | ℃ | |
| Melting temperature | 175 to 185 | ℃ |
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| drying temperature | 80 to 100 | °C | |
| Drying time | 2.0 to 4.0 | hr | |
| Hopper temperature | 20 to 40 | °C | |
| Temperature at the rear of the barrel | 190 to 210 | °C | |
| Temperature in the middle of the barrel | 190 to 210 | °C | |
| Front temperature of material barrel | 190 to 210 | °C | |
| Nozzle temperature | 190 to 210 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |