Purell EP370S - SOLIAO

About
Without exception, all potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical and Business contacts first. To discuss a medical/pharmaceutical application please contact your local Distributor or your local Lyondellbasell contact. Purell EP370S is a nucleated polypropylene impact copolymer suitable for use in injection molding applications. Purell EP370S is characterized by a good processability combined with a good stiffness-impact balance and good mechanical properties. Purell EP370S is typically used to produce medical devices, oral care, labware and other healthcare applications.

About

Without exception, all potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical and Business contacts first. To discuss a medical/pharmaceutical application please contact your local Distributor or your local Lyondellbasell contact. Purell EP370S is a nucleated polypropylene impact copolymer suitable for use in injection molding applications. Purell EP370S is characterized by a good processability combined with a good stiffness-impact balance and good mechanical properties. Purell EP370S is typically used to produce medical devices, oral care, labware and other healthcare applications.

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,High impact resistance,low-temperature impact resistance,Impact copolymer,Ethylene oxide disinfection
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	42	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	1250	MPa	ISO 527-2
tensile strength
yield	24.0	MPa	ISO 527-2
Tensile strain
yield	5.0	%
fracture	>50	%

IMPACT	Nominal value	Unit
Charpy Notched Impact Strength
-20℃	4.0	kJ/m²
0℃	4.5	kJ/m²
23℃	7.0	kJ/m²

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	90.0	℃	ISO 75-2/B
Vicat Softening Temp
A50	147	℃	ISO 306

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.