Purell GC7260 G

About
Purell GC7260 G is a HDPE material which exhibits good flowability and high rigidity. It contains an additive package for improved performace at higher extrusion temperatures and faster cycle times. Exceptional organoleptic properties and a good balance of stiffness, toughness and processability make Purell GC7260 G the choice of customers for the production of closures for still mineral water and many other types of food and non-food caps and closures. Without exception, all potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant LyondellBasell Technical and Business contacts first.&&

About

Purell GC7260 G is a HDPE material which exhibits good flowability and high rigidity. It contains an additive package for improved performace at higher extrusion temperatures and faster cycle times. Exceptional organoleptic properties and a good balance of stiffness, toughness and processability make Purell GC7260 G the choice of customers for the production of closures for still mineral water and many other types of food and non-food caps and closures. Without exception, all potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant LyondellBasell Technical and Business contacts first.&&

Product Description
Supplier	LyondellBasell
Generic	HDPE
Material Status	Commercial: Active
Features	Good Rigidity,Low warping,Excellent Processability,Good flexibility,Good liquidity,Quick molding cycle,Good sensory characteristics.,High pressure heat resistance,Heat Stabilized,Ethylene oxide disinfection
Availabilitys	Africa & Middle East ,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.960	g/cm³	ISO 1183
Melt Flow Rate			ISO 1133
190℃，2.16kg	8.0	g/10min	ISO 1133
190℃，5.0kg	23	g/10min	ISO 1133
Full incision creep test
50℃	2.5	hr	Internal Method

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179/1eA
-30℃	2.5	kJ/m²	ISO 179/1eA
23℃	4.0	kJ/m²	ISO 179/1eA

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp
B50	72.0	℃	ISO 306

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	64		ISO 868
Ball hardness
H 132/30	57.0	MPa	ISO 2039-1
Tensile modulus	1350	MPa	ISO 527-2
tensile strength
yield	30.0	MPa	ISO 527-2
Tensile strain
yield	10	%	ISO 527-2

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	190 to 230	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.