Purell HP371P - SOLIAO

About
Without exception, all potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical (P & AD) and Business contacts first. To discuss a medical/pharmaceutical application please contact: your local Distributor or your local Basell contact Purell HP371P is a polypropylene homopolymer with a gamma – ray stabilizing additivation. It exhibits a high fluidity and superior transparency. Purell HP371P is primarily designed for empty disposable three – part syringes which are not to be supplied in the same package as the medication itself and for other medical applications where no EP is needed. For regulatory information please refer to Purell HP371P Product Stewardship Bulletin (PSB)&&

About

Without exception, all potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical (P & AD) and Business contacts first. To discuss a medical/pharmaceutical application please contact: your local Distributor or your local Basell contact Purell HP371P is a polypropylene homopolymer with a gamma – ray stabilizing additivation. It exhibits a high fluidity and superior transparency. Purell HP371P is primarily designed for empty disposable three – part syringes which are not to be supplied in the same package as the medication itself and for other medical applications where no EP is needed. For regulatory information please refer to Purell HP371P Product Stewardship Bulletin (PSB)&&

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Gamma radiation,E-beam disinfection,Food contact compliance,Radiation disinfection,Moderate liquidity,High pressure heat resistance,Ethylene oxide disinfection,Homopolymer
Availabilitys	Africa & Middle East ,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	18	g/10min	ISO 1133
Melt Volume Rate
230℃，2.16 kg	24.0	cm³/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	1250	MPa	ISO 527-2
tensile strength
yield	31.0	MPa	ISO 527-2
Tensile strain			ISO 527-2
yield	15	%	ISO 527-2
fracture	> 50	%	ISO 527-2

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	4.0	kJ/m²	ISO 179
Charpy Unnotch Impact strength
23℃	170	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp
A50	150	℃	ISO 306/A50

optical performance	Nominal value	Unit	Test method
Haze
1000 µm	15	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.