Purell HP570U - SOLIAO

About
Without exception, all potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical (P & AD) and Business contacts first. To discuss a medical/pharmaceutical application please contact: your local Distributor or your local Basell contact Purell HP570U is a homopolymer suitable for injection moulding applications It exhibits a high fluidity combined with a high stiffness. Purell HP570U is extensively applied in 3-part syringes, closures and general injection moulding for thin-walled, warpage-critical applications. For regulatory information please refer to Purell HP570U Product Stewardship Bulletin (PSB)&&

About

Without exception, all potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical (P & AD) and Business contacts first. To discuss a medical/pharmaceutical application please contact: your local Distributor or your local Basell contact Purell HP570U is a homopolymer suitable for injection moulding applications It exhibits a high fluidity combined with a high stiffness. Purell HP570U is extensively applied in 3-part syringes, closures and general injection moulding for thin-walled, warpage-critical applications. For regulatory information please refer to Purell HP570U Product Stewardship Bulletin (PSB)&&

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Low warping,High liquidity,Food contact compliance,Ethylene oxide disinfection,Homopolymer
Availabilitys	Africa & Middle East ,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	75	g/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	2.0	kJ/m²	ISO 179
Charpy Unnotch Impact strength
23℃	80	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	85.0	℃	ASTM D648，ISO 75-2/B
Vicat Softening Temp
A50	154	℃	ISO 306/A50
B50	90.0	℃	ISO 306

MECHANICAL	Nominal value	Unit	Test method
Ball hardness
H358/30	80.0	MPa	ISO 2039-1
Tensile modulus	1550	MPa	ISO 527-2
tensile strength
yield	35.0	MPa	ISO 527-2
Tensile strain			ISO 527-2
Yield, 23 ℃	7.0	%	ISO 527-2
Fracture, 23 ℃	20	%	ISO 527-2

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.