Purell HP671T - SOLIAO

About
Purell HP671T is a high fluidity polypropylene, which is nucleated and has a gamma – ray stabilizing additivation. Purell HP671T is used in injection moulding medical applications. Without exception, the supply in such applications is subject to our preliminary review. Please get in contact with your local sales contact for further details. This grade exhibits a very high stiffness combined with an excellent transparency. Purell HP671T is applied in high transparency and rigid pharmaceutical and diagnostic applications. For regulatory information please refer to Purell HP671T Product Stewardship Bulletin (PSB) Without exception, all potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical (P & AD) and Business contacts first.&&

About

Purell HP671T is a high fluidity polypropylene, which is nucleated and has a gamma – ray stabilizing additivation. Purell HP671T is used in injection moulding medical applications. Without exception, the supply in such applications is subject to our preliminary review. Please get in contact with your local sales contact for further details. This grade exhibits a very high stiffness combined with an excellent transparency. Purell HP671T is applied in high transparency and rigid pharmaceutical and diagnostic applications. For regulatory information please refer to Purell HP671T Product Stewardship Bulletin (PSB) Without exception, all potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical (P & AD) and Business contacts first.&&

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Good Clarity,High liquidity,Gamma radiation,Nucleation,E-beam disinfection,Radiation disinfection,High pressure heat resistance,Ethylene oxide disinfection,Homopolymer
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	55	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	1900	MPa	ISO 527-2
tensile strength
Yield, 23 ℃	39.0	MPa	ISO 527-2
Tensile strain			ISO 527-2
Yield, 23 ℃	7.5	%	ISO 527-2
Fracture, 23 ℃	28	%	ISO 527-2

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	2.6	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	105	℃	ISO 75-2/B

optical performance	Nominal value	Unit	Test method
gloss
45°	125		ASTM D2457
Haze
1000 µm	13	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.