| About |
|---|
| Purell RP270G Purell RP270G is a medium modified random copolymer for extrusion applications with a high chemical resistance. The grade exhibits good clarity and good impact strength and an excellent processability. Purell RP270G is used for extrusion blow moulding, film and injection moulding in Healthcare applications after approval is given by LyondellBasell. For regulatory information please refer to Purell RP270G Product Stewardship Bulletin (PSB). Without exception, all potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical (P & AD) and Business contacts first.&&Purell RP270G Purell RP270G is a medium modified polypropylene random copolymer specially designed for blow moulding & sheet extrusion. Purell RP270G complies the European pharmacopeia. Purell RP270G offers excellent process ability in extrusion blow moulding & can be converted on form-fill-seal equipment. The Product is also suitable for the extrusion of film & sheets for thermoforming. Purell RP270G offers a good impact strength, good clarity & high chemical resistance. The main applications of this product are transparent bottles & containers for blood, intravenous solutions, pharmaceutical solutions, medicines & salves. Other applications are packaging for health care products (toothpaste, mouthwash & saline solutions), film & sheet for thermoforming. * Purell RP270G is medical approved.&& |
| Product Description | |
|---|---|
| Supplier | LyondellBasell |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Clarity,High impact resistance,Good liquidity,Food contact compliance,Random copolymer,Solvent resistance,Ethylene oxide disinfection |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 1.8 | g/10min | ISO 1133 |
| Melt Volume Rate | |||
| 230℃，2.16 kg | 2.40 | cm³/10min | ISO 1133 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| 0℃ | 3.8 | kJ/m² | ISO 179/1eA |
| 23℃ | 28 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | ISO 179/1eU | ||
| 0℃ | 210 | kJ/m² | ISO 179/1eU |
| 23℃ | No Break | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 67.0 | ℃ | ISO 75-2/B |
| Vicat Softening Temp | |||
| A50 | 134 | ℃ | ISO 306/A50 |
| B50 | 68.0 | ℃ | ISO 306 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 60° | 95 | ISO 67530 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 950 | MPa | ISO 527-2 |
| tensile strength | |||
| yield | 25.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | > 50 | % | ISO 527-2 |
| yield | 14 | % | ISO 527-2 |
| Ball hardness | |||
| H358/30 | 47.0 | MPa | ISO 2039-1 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Loading 1 (10 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |