Purell RP320M - SOLIAO

About
Purell RP320M is a controlled rheology medium modified polypropylene random copolymer. It does not contain slip or anti-blocking additives. Purell RP320M is typically used by customers for manufacturing of un-oriented cast films. Customer report lamination, textile and packaging of foodstuffs as typical applications. It has been reported by customers that Purell RP320M exhibit good processability, and that films produced with Purell RP320M exhibits high clarity and gloss, softness and good heat weldability. All potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical and Business contacts first. To discuss a medical/pharmaceutical application please contact your local Lyondellbasell reference or your local Distributor.

About

Purell RP320M is a controlled rheology medium modified polypropylene random copolymer. It does not contain slip or anti-blocking additives. Purell RP320M is typically used by customers for manufacturing of un-oriented cast films. Customer report lamination, textile and packaging of foodstuffs as typical applications. It has been reported by customers that Purell RP320M exhibit good processability, and that films produced with Purell RP320M exhibits high clarity and gloss, softness and good heat weldability. All potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical and Business contacts first. To discuss a medical/pharmaceutical application please contact your local Lyondellbasell reference or your local Distributor.

Product Description
Supplier	LyondellBasell
Generic	PP copolymer
Material Status	Commercial: Active
Features	Random copolymer,High pressure heat resistance,Ethylene oxide disinfection
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	8.5	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	850	MPa	ISO 527-2
Tensile stress
yield	25.0	MPa
fracture	28.0	MPa
Tensile strain
yield	13	%
fracture	600	%
Bending modulus	850	MPa	ISO 178

IMPACT	Nominal value	Unit
Charpy Notched Impact Strength
0℃	2.0	kJ/m²
23℃	7.0	kJ/m²

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	68.0	℃	ISO 75-2/B
Vicat Softening Temp
A50	135	℃	ISO 306

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.