PureTherm® 1001C Aluminum Look Alike

About
PureTherm® 1001C Aluminum Look Alike is a rigid PVC film with transmission values below the USP standard of 10% in the critical ultraviolet 290 — 450 nm range. This film is the same as PureTherm® 1001C with the addition of white pigment to allow for the packaging of light sensitive pharmaceutical products or where it is desirable that the blister contents are not visible. Applications for PureTherm® 1001C include blister packaging of tablets, capsules, lozenges, suppositories as well as use in laminations.&&

About

PureTherm® 1001C Aluminum Look Alike is a rigid PVC film with transmission values below the USP standard of 10% in the critical ultraviolet 290 — 450 nm range. This film is the same as PureTherm® 1001C with the addition of white pigment to allow for the packaging of light sensitive pharmaceutical products or where it is desirable that the blister contents are not visible. Applications for PureTherm® 1001C include blister packaging of tablets, capsules, lozenges, suppositories as well as use in laminations.&&

Product Description
Generic	PVC, not specified
Material Status	Commercial: Active
Features	Good Rigidity,Self-extinguishing
Availabilitys	North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.33	g/cm³

film	Nominal value	Unit	Test method
film thickness	127 to 1020	µm
tensile strength
MD, yield	48.0	MPa	ASTM D882
Oxygen permeability (wet) (23 ℃, 250 µ m, 100% RH)	18.1	cm³/m²/24 hr	ASTM F1927
Water vapor permeability	3.1	g/m²/24 hr	ASTM E96
Free contraction	-4.0 to 4.0	%	ASTM D2732

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature	75	℃	ASTM D1637
Cold shock	Good

Supplementary information	Nominal value	Unit	Test method
Roll Width	< 106.70	cm
Temperature of hot forming mold	100 to 175	℃

Notes
1. Typical properties: these are not to be construed as specifications.
2. Thickness tolerance: ±10%
3. at 10 mil at 38°C, 90% RH
4. Roll width tolerance: ±1.5 mm
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.