Qenos PE GM5010T2

About
GM5010T2 is a black high molecular weight High Density Polyethylene copolymer grade designed to provide a balance of excellent processing characteristics with toughness, excellent chemical resistance, ESCR and weatherability. It contains an effective stabiliser and carbon black pigment which ensures long service life. A minimum service life of 50 years is achievable under appropriate pressure and temperature conditions. GM5010T2 is designed for use as a general purpose jacketing compound for buried wires and cables where abrasion resistance and cut-through resistance in rocky terrain is required. It is also used for line-wire and drop-wire applications in a wide range of environments. GM5010T2 has also been designed for extrusion into a full range of pressure and non-pressure pipe and fitting sizes, where High Density, PE 80 Type C resins are required. GM5010T2 is suitable for use in the transport of a wide range of fluids for industrial, rural and mining applications, including potable water. GM5010T2 is designed to meet the requirements for PE 80 Type C compounds under AS 4131. GM5010T2 is suitable for food contact applications and conforms to the requirements of AS2070.&&

About

GM5010T2 is a black high molecular weight High Density Polyethylene copolymer grade designed to provide a balance of excellent processing characteristics with toughness, excellent chemical resistance, ESCR and weatherability. It contains an effective stabiliser and carbon black pigment which ensures long service life. A minimum service life of 50 years is achievable under appropriate pressure and temperature conditions. GM5010T2 is designed for use as a general purpose jacketing compound for buried wires and cables where abrasion resistance and cut-through resistance in rocky terrain is required. It is also used for line-wire and drop-wire applications in a wide range of environments. GM5010T2 has also been designed for extrusion into a full range of pressure and non-pressure pipe and fitting sizes, where High Density, PE 80 Type C resins are required. GM5010T2 is suitable for use in the transport of a wide range of fluids for industrial, rural and mining applications, including potable water. GM5010T2 is designed to meet the requirements for PE 80 Type C compounds under AS 4131. GM5010T2 is suitable for food contact applications and conforms to the requirements of AS2070.&&

Product Description
Supplier	Qenos
Generic	HMW-HDPE
Material Status	Commercial: Active
Features	Weather resistance is good,Excellent Processability,Good flexibility,Food contact compliance,High molecular weight,Copolymer,Good wear resistance,Solvent resistance,High ESCR
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.958	g/cm³	ASTM D792
Melt Flow Rate			ASTM D1238
190℃，2.16kg	0.10	g/10min
190℃，21.6kg	11	g/10min
ESCR(Environmental Stress Cracking Resistance)
F50	1000	hr	ASTM D1693

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	61		ASTM D2240，ISO 868
tensile strength
yield	25.0	MPa	ASTM D638
Tensile strain
fracture	700	%	ASTM D638
Bending modulus	800	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.