Qenos PE HD2845

About
HD2845 is a medium molecular weight High Density Polyethylene copolymer blow moulding resin, suited for use in applications where ESCR is a major requirement. HD2845 may be used in household & industrial chemical (HIC) containers such as detergent and bleach bottles. HD2845 is also suitable for Dangerous Goods (DG) applications – depending on the design of the container, the goods to be stored and the DG grouping. Suitability for use in any application should be determined by appropriate performance testing. HD2845 is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c) item 3.1.&&

About

HD2845 is a medium molecular weight High Density Polyethylene copolymer blow moulding resin, suited for use in applications where ESCR is a major requirement. HD2845 may be used in household & industrial chemical (HIC) containers such as detergent and bleach bottles. HD2845 is also suitable for Dangerous Goods (DG) applications – depending on the design of the container, the goods to be stored and the DG grouping. Suitability for use in any application should be determined by appropriate performance testing. HD2845 is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c) item 3.1.&&

Product Description
Supplier	Qenos
Generic	MMW-HDPE
Material Status	Commercial: Active
Features	Food contact compliance,Copolymer,High ESCR
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.953	g/cm³	ASTM D1505
Melt Flow Rate			ASTM D1238
190℃，2.16kg	0.20	g/10min
190℃，21.6kg	21	g/10min
190℃，5.0kg	0.80	g/10min
ESCR(Environmental Stress Cracking Resistance)
F50	200	hr	ASTM D1693

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	62		ASTM D2240
Tensile modulus
Secant	800	MPa	ASTM D638
tensile strength			ASTM D638
yield	28.0	MPa
fracture	32.0	MPa
Tensile strain
fracture	900	%	ASTM D638
Bending modulus	920	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.