Qenos PE MD0592-1

About
MD 0592-1 is a natural, high molecular weight MDPE co-polymer, developed as a general purpose resin for use in coloured resins for striping, pipe and wire & cable applications. MD 0592-1 contains antioxidants to protect it during extrusion and end use. MD 0592-1 has been designed for extrusion into a full range of pipe and wire & cable products where Medium Density resins are required. Suitability for use in any application should be determined by appropriate performance testing. MD 0592-1 is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c) item 3.1.&&

About

MD 0592-1 is a natural, high molecular weight MDPE co-polymer, developed as a general purpose resin for use in coloured resins for striping, pipe and wire & cable applications. MD 0592-1 contains antioxidants to protect it during extrusion and end use. MD 0592-1 has been designed for extrusion into a full range of pipe and wire & cable products where Medium Density resins are required. Suitability for use in any application should be determined by appropriate performance testing. MD 0592-1 is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c) item 3.1.&&

Product Description
Supplier	Qenos
Generic	MDPE
Material Status	Commercial: Active
Features	Food contact compliance,Inoxidizability,High molecular weight,Copolymer
Availabilitys	Asia Pacific
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.942	g/cm³	ASTM D1505
Melt Flow Rate			ASTM D1238
190℃，2.16kg	0.12	g/10min	ASTM D1238
190℃，21.6kg	14	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
F50	5000	hr	ASTM D1693

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	60		ASTM D2240
Tensile modulus	800	MPa	ASTM D638
tensile strength			ASTM D638
yield	20.0	MPa	ASTM D638
fracture	30.0	MPa	ASTM D638
Tensile strain
fracture	900	%	ASTM D638
Bending modulus	500	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.