| About |
|---|
| PPW 1762 is an ultra high flow, Polypropylene copolymer. PPW 1762 enables fast cycling of thin walled food containers and flower pots. Suitability for use in any application should be determined by appropriate performance testing. PPW 1762 is suitable for food contact applications and conforms to the requirements of AS2070-1999, Plastics Materials for Food Contact Use.&& |
| Product Description | |
|---|---|
| Supplier | Qenos |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | High liquidity,Quick molding cycle,Food contact compliance,Copolymer |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.902 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 43 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 26.0 | MPa | ASTM D638 |
| Bending modulus | 1400 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ASTM D256A | ||
| -30℃ | 35 | J/m | ASTM D256-A |
| 23℃ | 50 | J/m | ASTM D256-A |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |