| About |
|---|
| Quadrant EPP PSU是一种聚砜(PSU)产品,。 它可以通过挤出进行加工,在北美洲或拉丁美洲有供货。 Quadrant EPP PSU的应用领域包括食品接触应用、水管/管道/饮用水 和 医疗/保健。 主要特性为:阻燃/额定火焰。 |
| Product Description | |
|---|---|
| Supplier | Quadrant |
| Generic | PSU |
| Material Status | Commercial: Active |
| Availabilitys | North America,Latin America |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.24 | g/cm³ | ASTM D792 |
| Water absorption rate | |||
| 24hr | 3.0E-3 | % | |
| saturated | 6.0E-3 | % | |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 69 | J/m | ASTM D256-A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 171 | ℃ | ASTM D648 |
| Glass transition temperature | 190 | ℃ | ASTM D3418 |
| Linear coefficient of thermal expansion | |||
| MD：-40~149℃ | 5.6E-5 | 1/℃ | ASTM E831 |
| Thermal conductivity coefficient | 0.26 | W/m/K | ASTM F433 |
| Maximum operating temperature | |||
| Air，Long Term | 149 | ℃ |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | > 1.0E+13 | ohms | ESD S11.11 |
| Dielectric strength | 17 | kV/mm | ASTM D149 |
| Dielectric constant | |||
| 1 MHz | 3.14 | ASTM D150 | |
| Dissipation factor | |||
| 1 MHz | 8.0E-4 | ASTM D150 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 3.20 mm | HB | UL 94 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Machinability | 3.00 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 80 | ASTM D2240 | |
| Rockwell hardness | |||
| M-level | 82 | ||
| R-level | 128 | ||
| Tensile modulus | 2690 | MPa | ASTM D638 |
| tensile strength | |||
| — | 70.3 | MPa | |
| 65℃ | 55.2 | MPa | |
| 150℃ | 41.4 | MPa | |
| Tensile strain | |||
| fracture | 0.30 | % | ASTM D638 |
| Bending modulus | 2760 | MPa | ASTM D790 |
| bending strength | 103 | MPa | ASTM D790 |
| Compression modulus | 2590 | MPa | ASTM D695 |
| compressive strength | |||
| 10% strain | 89.6 | MPa | ASTM D695 |
| shear strength | 62.1 | MPa | ASTM D732 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |