Quadraplast™ AR 100

About
Quadraplast™ AR 100 is high performance aromatic thermoplastic rigid polyurethane. The polymer is opaque and supplied in small pellets for ease of processing. The material exhibits excellent toughness, oxidative stability, biocompatibility, chemical resistance, dimensional stability, and bonding properties. Quadrathane™, Quadraflex™, Quadraban™ and Quadraplast™ performance TPU polymers are primarily used in life science and medical applications including vascular access devices, surgical supplies, respiratory devices, tracheotomy devices, and other medical applications. Typical end products include tubing, catheter parts, balloons, and various medical device components. Quadraplast™ is easily bonded to Quadrathane™ and Quadraflex™ tubing using over molding or solvent bonding processes.&&

About

Quadraplast™ AR 100 is high performance aromatic thermoplastic rigid polyurethane. The polymer is opaque and supplied in small pellets for ease of processing. The material exhibits excellent toughness, oxidative stability, biocompatibility, chemical resistance, dimensional stability, and bonding properties. Quadrathane™, Quadraflex™, Quadraban™ and Quadraplast™ performance TPU polymers are primarily used in life science and medical applications including vascular access devices, surgical supplies, respiratory devices, tracheotomy devices, and other medical applications. Typical end products include tubing, catheter parts, balloons, and various medical device components. Quadraplast™ is easily bonded to Quadrathane™ and Quadraflex™ tubing using over molding or solvent bonding processes.&&

Product Description
Generic	TPU
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Good flexibility,Good Dimensional Stability,Aromatic,Biocompatible,Inoxidizability,Solvent resistance,Agglomerability
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.19	g/cm³	ASTM D792
Shrinkage rate
MD	0.40 to 0.60	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	110		ASTM D785
Tensile modulus	1450	MPa	ASTM D638
tensile strength
fracture	51.7	MPa	ASTM D638
Tensile strain			ASTM D638
yield	6.0	%	ASTM D638
fracture	140	%	ASTM D638
Bending modulus	1650	MPa	ASTM D790
bending strength	65.5	MPa	ASTM D790

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	77 to 88	°C
Drying time	8.0 to 12	hr
Recommended maximum moisture content	< 0.020	%
Barrel rear temperature	204 to 232	°C
Barrel middle temperature	232 to 249	°C
Barrel front temperature	238 to 254	°C
Nozzle temperature	246 to 260	°C
Processing (melt) temperature	221 to 241	°C
Mold temperature	60 to 88	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.