| About |
|---|
| Queo 1001 is an ethylene based octene-1 plastomer, produced in a solution polymerisation process using a metallocene catalyst. CAS-No.: 26221-73-8 Applications Queo 1001 Demonstrated applications include: Seal layers in lamination and flexible barrier films Blow moulding High strength flexible films Soft foams, e.g. artificial wine corks Flexible low voltage insulation Flexible automotive boots and bellows Additives Queo 1001 contains processing stabilizers Special Features Queo 1001 is optimised to deliver: Versatile blending with other polyolefins in film, extrusion and moulding applications. Outstanding puncture resistance Low temperature impact strength Unrivalled sealing and hot tack properties at low temperature High flexibility and surface softness High clarity Outstanding toughness Excellent environmental stress cracking resistance (ESCR)&& |
| Product Description | |
|---|---|
| Supplier | Borealis AG |
| Generic | 乙烯基辛烯塑料 |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good Clarity,Good flexibility,low-temperature impact resistance,Puncture Resistant,High ESCR |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.910 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 1.1 | g/10min | ISO 1133 |
| ESCR(Environmental Stress Cracking Resistance) | > 1000 | hr | ASTM D1693B |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 49 | ISO 868 | |
| tensile strength | |||
| fracture | 35.0 | MPa | ISO 527-2/5A |
| Tensile strain | |||
| fracture | 750 | % | ISO 527-2/5A |
| Bending modulus | 132 | MPa | ISO 178 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Secant modulus | |||
| MD | 90.0 | MPa | ASTM D882 |
| Drop hammer impact | |||
| Blown film | > 22 | g | ASTM D1709 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | No Break | ISO 180/1A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -76.0 | ℃ | ASTM D746 |
| Vicat Softening Temp | 93.0 | ℃ | ISO 306/A |
| Melting temperature | |||
| DSC | 106 | ℃ | ISO 11357 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 45° | 81 | ASTM D2457 | |
| Haze | 2.0 | % | ASTM D1003A |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Puncture resistance | 28.0 | J/cm | Internal Method |
| Sealing Initial Temperature | 87 | ℃ | ASTM F88 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Blown Film, Monsanto Dart |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |