Queo™ 8203 - SOLIAO

About
Queo 8203 is an ethylene based octene-1 plastomer, produced in a solution polymerisation process using a metallocene catalyst. CAS-No.: 26221-73-8 Applications Queo 8203 Demonstrated applications include: Specialty stretch film applications Extrusion coating High strength flexible films Flexible low voltage insulation Roof coverings Halogen free flame retardant compounds Impact modification of PP Blow moulding Tunnel linings Soft foams, e.g. artificial wine corks Additives Queo 8203 contains processing stabilizers Special Features Queo 8203 is optimised to deliver: High melt strength – processability balance High clarity Outstanding toughness filler and oil acceptance Outstanding puncture resistance Low temperature flex-cracking and impact resistance Low temperature impact strength Low dielectric constant and dissipation factor High flexibility and surface softness&&

About

Queo 8203 is an ethylene based octene-1 plastomer, produced in a solution polymerisation process using a metallocene catalyst. CAS-No.: 26221-73-8 Applications Queo 8203 Demonstrated applications include: Specialty stretch film applications Extrusion coating High strength flexible films Flexible low voltage insulation Roof coverings Halogen free flame retardant compounds Impact modification of PP Blow moulding Tunnel linings Soft foams, e.g. artificial wine corks Additives Queo 8203 contains processing stabilizers Special Features Queo 8203 is optimised to deliver: High melt strength – processability balance High clarity Outstanding toughness filler and oil acceptance Outstanding puncture resistance Low temperature flex-cracking and impact resistance Low temperature impact strength Low dielectric constant and dissipation factor High flexibility and surface softness&&

Product Description
Supplier	Borealis AG
Generic	乙烯基辛烯塑料
Material Status	Commercial: Active
Features	Excellent Processability,Good Clarity,Good flexibility,Halogen free,Flame Characteristics,Good melt strength,Low temperature toughness,low-temperature impact resistance,Puncture Resistant
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.882	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	3.0	g/10min	ISO 1133
ESCR(Environmental Stress Cracking Resistance)	> 1000	hr	ASTM D1693B

MECHANICAL	Nominal value	Unit	Test method
Shore hardness			ISO 868
Shaw’s A	85		ISO 868
Shaw’s D	< 30		ISO 868
tensile strength
fracture	22.0	MPa	ISO 527-2/5A
Tensile strain
fracture	820	%	ISO 527-2/5A
Bending modulus	24.0	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	No Break		ISO 180/1A

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -76.0	℃	ASTM D746
Vicat Softening Temp	50.0	℃	ISO 306/A
Melting temperature
DSC	74.0	℃	ISO 11357

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.