| About |
|---|
| Product Description | |
|---|---|
| Supplier | Solvay |
| Material Status | Commercial: Negative |
| Features | Heat sterilization,Gamma radiation,High ESCR,Radioactive,Good disinfection,Heat Stabilized,Ethylene oxide disinfection,Biocompatible,E-beam disinfection,Solvent resistance,Hydrolysis stability,Alkali resistant,Resistance to the steam,Acidproof,High Heat Resistance,Steam sterilized,Ultra high toughness,Radiation disinfection,V-0,Flame Characteristics,High pressure disinfection |
| Availabilitys | Europe,Asia Pacific,North America,Latin America |
| Process Methods | Injection Molding,Extrusion,Thermo forming |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.29 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 365℃，5.0kg | 26 – 40 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD：3.2 mm | 0.70 | % | ASTM D955 |
| Water absorption rate | |||
| 24hr | 0.37 | % | ASTM D570 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| 3.18 mm | 2340 | MPa | ASTM D638 |
| tensile strength | |||
| 3.18 mm | 70.3 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 3.18 mm | 60 – 120 | % | ASTM D638 |
| Yield, 3.18 mm | 7.2 | % | ASTM D638 |
| Bending modulus | |||
| 3.17 mm | 2340 | MPa | ASTM D790 |
| bending strength | |||
| 5% strain, 3.18 mm | 100 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 3.2mm | 690 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed, 3.2 mm | 207 | ℃ | ASTM D648 |
| Glass transition temperature | 220 | ℃ | DSC |
| Linear coefficient of thermal expansion | |||
| MD：3.2 mm | 5.6E-5 | 1/℃ | ASTM D696 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| 0.76 mm | V-0 | UL 94 |
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| extrusion | Nominal value | Unit | Test method |
| drying temperature | 149 | °C | null |
| Drying time | 4 | hr | null |
| Processing (melt) temperature | 360 – 391 | °C | null |
| Mold temperature | 138 – 163 | °C | null |
| Screw compression ratio | 2.2:1.0 | null | |
| drying temperature | 171 | °C | null |
| Drying time | 4.0 | hr | null |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |