| About |
|---|
| Product Description | |
|---|---|
| Supplier | Radici |
| Generic | PA6 |
| Material Status | Commercial: Negative |
| Features | Heat Stabilized,Good heat aging resistance,Good Rigidity |
| Availabilitys | North America,Europe,Asia Pacific,Latin America,Africa & Middle East |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.35 | g/cm³ | ISO 1183 |
| Shrinkage rate | |||
| MD | 0.30 | % | ISO 294-4 |
| TD | 0.80 | % | ISO 294-4 |
| Water absorption rate | |||
| Saturation, 23 ℃, 2.00 mm | 7.5 | % | ISO 62 |
| Equilibrium, 23 ℃, 50% RH, 2.00 mm | 2.0 | % | ISO 62 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| 1mm/min | 9400 | MPa | ISO 527-2/1A |
| Tensile stress | |||
| Fracture, 5mm/min | 165 | MPa | ISO 527-2/1A |
| Tensile strain | |||
| Fracture, 5mm/min | 3.2 | % | ISO 527-2/1A |
| Bending modulus | |||
| 2mm/min | 8800 | MPa | ISO 178 |
| bending strength | |||
| 2mm/min | 250 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy impact strength | |||
| 23℃ | 85 | kJ/m² | ISO 179/1eU |
| -30℃ | 70 | kJ/m² | ISO 179/1eU |
| Charpy Notched Impact Strength | |||
| 23℃ | 13 | kJ/m² | ISO 179/1eA |
| -30℃ | 9 | kJ/m² | ISO 179/1eA |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 215 | ℃ | ISO 75/2Bf |
| 1.8 MPa, unannealed | 200 | ℃ | ISO 75/2Af |
| Vicat Softening Temp | |||
| 50°C/h 50N | 210 | ℃ | ISO 306/B |
| Melting temperature | 220 | ℃ | ISO 11357-1/-3 |
| Linear coefficient of thermal expansion | |||
| MD：23°C-55°C | 1E-6 | /K | ISO 11359-1/-2 |
| TD：23°C-55°C | 1E-6 | /K | ISO 11359-1/-2 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | |||
| 500V | 1.0E+12 | ohm | IEC 62631-3-2 |
| Volume resistivity | |||
| 500V | 1.0E+13 | ohm·cm | IEC 62631-3-1 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 0.8 mm | HB | UL 94 | |
| Burning rate | |||
| 3.0 mm | 0.0 | mm/min | ISO 3795 |
| Glowing wire flammability index | |||
| 2.0 mm | 650 | ℃ | IEC 60695-2-12 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |