Raditer® B RVA100

About
PBT/ASA blend 10% Glass fibre reinforced injection moulding grade. For items with enhanced stiffness. High dimensional stability and Low warpage. Good surface quality. Natural colour.&&

Product Description
Supplier	Radici
Generic	polybutylene terephthalate
Material Status	Commercial: Active
Features	Good Rigidity,Low warping,Good surface appearance,Good Dimensional Stability,HB
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.31	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	4200	MPa	ISO 527-2
tensile strength
fracture	75.0	MPa	ISO 527-2
Tensile strain
fracture	2.5	%	ISO 527-2

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179/eA
-30℃	4.5	kJ/m²	ISO 179/eA
23℃	5.5	kJ/m²	ISO 179/eA
Charpy Unnotch Impact strength			ISO 179/eU
-30℃	30	kJ/m²	ISO 179/eU
23℃	45	kJ/m²	ISO 179/eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	110	℃	ISO 75-2/Af
Melting temperature
DSC	225	℃	ISO 3146

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
1.60 mm	HB		UL 94

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.