RAMAPET® R180

About
RAMAPET R180 is a general purpose polymer with “clear reheat” for the European market. Typical applications include carbonated soft drinks (CSD), carbonated and still water, household products, pharmaceutical, and general purpose containers. The product is also suitable for film & sheet applications. RAMAPET R180 contains a moderate level of a “clear” reheat additive which does not compromise the bottle appearance. The formulation gives a better reheat consistency than PET without reheat, allowing the blowing of more complicated shapes and an efficient blowing of the latest, light-weighted preform/bottle designs. The use of reheat additive provides significant energy saving up to 30% when reheating preforms.&&

About

RAMAPET R180 is a general purpose polymer with “clear reheat” for the European market. Typical applications include carbonated soft drinks (CSD), carbonated and still water, household products, pharmaceutical, and general purpose containers. The product is also suitable for film & sheet applications. RAMAPET R180 contains a moderate level of a “clear” reheat additive which does not compromise the bottle appearance. The formulation gives a better reheat consistency than PET without reheat, allowing the blowing of more complicated shapes and an efficient blowing of the latest, light-weighted preform/bottle designs. The use of reheat additive provides significant energy saving up to 30% when reheating preforms.&&

Product Description
Generic	PET
Material Status	Commercial: Active
Features	Optical performance,Food contact compliance
Availabilitys	Europe

Technical Data
THERMAL	Nominal value	Unit	Test method
Glass transition temperature	76.0 to 80.0	℃	ASTM D1238
Melting peak temperature	240 to 250	℃	ASTM D3418
Fusion heat	56.0	kJ/kg	ASTM E793

Supplementary information	Nominal value	Unit
Fines	< 0.1	wt%
Particle shape	Cubical
Particle size	2.50	mm
Pellet Weight	55.0 to 65.0	pcs/g

PHYSICAL	Nominal value	Unit	Test method
Density	1.39 to 1.40	g/cm³	ASTM D1505
Apparent density			ASTM D1895
pouring	0.83	g/cm³	ASTM D1895
vibration	0.88	g/cm³	ASTM D1895
Acetaldehyde	< 1.0	ppm
Color a	-3.80 to -0.800
Color b	-3.50 to 1.00
Color L	> 76.0
Crystallinity	45 to 55	%
Intrinsic viscosity	0.78 to 0.82	dl/g
water content	< 0.30	%
Melt density
285℃	1.20	g/cm³	ASTM D1238

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	150 to 170	°C
Drying time	6.0	hr

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.